Description:
1. Self- timer --- Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
2. interval timer --- The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
3. long- exposure timer --- It allows you to take time exposures up to 100 hours long.
4. exposure-count setting --- This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.
There is one shutter release cable for free in this set, you can connect the remote cord and camera, and then you can use it as normal basic wired shutter release like the first version.
Specifications:
Parameters:
Timer delay ：0s to 99hrs 59min 59s in one-second increments
Exposure time ：0s to 99hrs 59min 59s in one-second increments
Interval : 1s to 99hrs 59min 59s in one-second increments
Number of shots : 1 to 399,-- (unlimited)
Power source : 2 x AAA batteries + 1 x CR2
Battery life : Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life.
Operating Frequency : FSK 2.4 GHZ,it is suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability
Operating Temperature : -20°c - + 50°c
Dimensions : 155mm x 40mm x 18mm 45mm x 35mm x 25mm
Weight : 202g
Almost thought it was faulty..cause bought from HongKong and didn't check it. At the end, CR2 battery included wasn't enough to run the receiver. After changing new battery it work! HENG AH...
